Never Miss
Any Deals
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla nibh magna, sollicitudin eget erat condimentum, mollis mattis justo. Vestibulum auctor elementum enim quis sagittis. Cras elementum nisl
Our Clients
Stainless Steel Internal Circlip, Type B, DIN472
Stainless Steel Internal Circlip, Type B, DIN472 is available to buy in increments of 50
Available in:
Sizes: B10-B100
Material: SS304, Mild Steel, Hardened Steel
Sizes: B10-B100
Material: SS304, Mild Steel, Hardened Steel
An Internal Circlip, is a kind of a retaining ring, which primarily fits in grooved bores axially. The circlip is applied in a groove in a bore in a shaft with the help of pliers and the exposed portion of this circlip is strong enough to hold assemblies within the shaft.
Technical Specifications
as per DIN 472
Housing Diameter (mm) |
Free Diameter | Max Sec | Lug Height | Hole Diameter |
Thickness | ||
Df |
Tolerance | S | H | R |
T |
Tolerance | |
Ref | Max | Min | |||||
8 | 8.7 |
+0.36/ -0.10 | 1.1 | 2.4 | 1.0 | 0.80 |
-0.05 |
9 | 9.8 | 1.3 | 2.5 | 1.0 | 0.80 | ||
10 | 10.8 | 1.4 | 3.2 | 1.2 | 1.00 |
-0.06 | |
11 | 11.8 | 1.5 | 3.3 | 1.2 | 1.00 | ||
12 | 13.0 | 1.7 | 3.4 | 1.5 | 1.00 | ||
13 | 14.1 | 1.8 | 3.6 | 1.5 | 1.00 | ||
14 | 15.1 | 1.8 | 3.7 | 1.7 | 1.00 | ||
15 | 16.2 | 2.0 | 3.7 | 1.7 | 1.00 | ||
16 | 17.3 | 2.0 | 3.8 | 1.7 | 1.00 | ||
17 | 18.3 |
+0.42/ -0.13 | 2.1 | 3.9 | 1.7 | 1.00 | |
18 | 19.5 | 2.2 | 4.1 | 2.0 | 1.00 | ||
19 | 20.5 | 2.2 | 4.1 | 2.0 | 1.00 | ||
20 | 21.5 | 2.3 | 4.1 | 2.0 | 1.00 | ||
21 | 22.5 | 2.4 | 4.2 | 2.0 | 1.00 | ||
22 | 23.5 | 2.5 | 4.2 | 2.0 | 1.00 | ||
23 | 24.6 | 2.5 | 4.2 | 2.0 | 1.20 | ||
24 | 25.9 |
+0.42/ -0.21 | 2.6 | 4.4 | 2.0 | 1.20 | |
25 | 26.9 | 2.7 | 4.5 | 2.0 | 1.20 | ||
26 | 27.9 | 2.8 | 4.7 | 2.0 | 1.20 | ||
27 | 29.9 | 2.9 | 4.7 | 2.0 | 1.20 | ||
28 | 30.1 |
+0.50/ -0.25 | 2.9 | 4.8 | 2.0 | 1.20 | |
29 | 31.1 | 3.0 | 4.8 | 2.0 | 1.20 | ||
30 | 32.1 | 3.0 | 4.8 | 2.0 | 1.20 | ||
31 | 33.4 | 3.1 | 5.2 | 2.5 | 1.20 | ||
32 | 34.4 | 3.2 | 5.4 | 2.5 | 1.20 | ||
33 | 35.5 | 3.3 | 5.4 | 2.5 | 1.20 | ||
34 | 36.5 | 3.3 | 5.4 | 2.5 | 1.50 | ||
Housing Diameter (mm) | Free Diameter | Max Sec | Lug Height | Hole Diameter | Thickness | ||
Df | Tolerance | S | H | R | T | Tolerance | |
Ref | Max | Min | |||||
35 | 37.8 |
+0.50/ -0.25 | 3.4 | 5.4 | 2.5 | 1.50 |
-0.06 |
36 | 38.8 | 3.5 | 5.4 | 2.5 | 1.50 | ||
37 | 39.8 | 3.6 | 5.5 | 2.5 | 1.50 | ||
38 | 40.8 | 3.7 | 5.5 | 2.5 | 1.50 | ||
39 | 42.0 |
+0.90/ -0.39 | 3.8 | 5.6 | 2.5 | 1.50 | |
40 | 43.5 | 3.9 | 5.8 | 2.5 | 1.75 | ||
41 | 44.5 | 4.0 | 5.9 | 2.5 | 1.75 | ||
42 | 45.5 | 4.1 | 5.9 | 2.5 | 1.75 | ||
43 | 46.5 | 4.2 | 5.9 | 2.5 | 1.75 | ||
44 | 47.5 | 4.2 | 6.0 | 2.5 | 1.75 | ||
45 | 48.5 | 4.3 | 6.2 | 2.5 | 1.75 | ||
46 | 49.5 | 4.4 | 6.3 | 2.5 | 1.75 | ||
47 | 50.5 |
+1.10/ -0.46 | 4.4 | 6.4 | 2.5 | 1.75 | |
48 | 51.5 | 4.5 | 6.4 | 2.5 | 1.75 | ||
50 | 54.2 | 4.6 | 6.5 | 2.5 | 2.00 |
-0.07 | |
51 | 55.2 | 4.7 | 6.5 | 2.5 | 2.00 | ||
52 | 56.2 | 4.7 | 6.7 | 2.5 | 2.00 | ||
53 | 57.2 | 4.9 | 6.7 | 2.5 | 2.00 | ||
54 | 58.2 | 5.0 | 6.7 | 2.5 | 2.00 | ||
55 | 59.2 | 5.0 | 6.8 | 2.5 | 2.00 | ||
56 | 60.2 | 5.1 | 6.8 | 2.5 | 2.00 | ||
57 | 61.2 | 5.1 | 6.8 | 2.5 | 2.00 | ||
58 | 62.2 | 5.2 | 6.9 | 2.5 | 2.00 | ||
60 | 64.2 | 5.4 | 7.3 | 2.5 | 2.00 | ||
62 | 66.2 | 5.5 | 7.3 | 2.5 | 2.00 | ||
63 | 67.2 | 5.6 | 7.3 | 2.5 | 2.00 | ||
65 | 69.2 | 5.8 | 7.6 | 3.0 | 2.50 | ||
67 | 71.5 | 6.0 | 7.7 | 3.0 | 2.50 | ||
68 | 72.5 | 6.1 | 7.8 | 3.0 | 2.50 | ||
70 | 74.5 | 6.2 | 7.8 | 3.0 | 2.50 | ||
72 | 76.5 | 6.4 | 7.8 | 3.0 | 2.50 | ||
75 | 79.5 | 6.6 | 7.8 | 3.0 | 2.50 | ||
77 | 82.5 |
+1.30/ -0.54 | 6.8 | 8.5 | 3.0 | 2.50 | |
78 | 82.5 | 6.8 | 8.5 | 3.0 | 2.50 | ||
80 | 85.5 | 7.0 | 8.5 | 3.0 | 2.50 | ||
82 | 87.5 | 7.0 | 8.5 | 3.0 | 2.50 | ||
85 | 90.5 | 7.2 | 8.6 | 3.5 | 3.00 |
-0.08 | |
87 | 93.5 | 7.4 | 8.6 | 3.5 | 3.00 | ||
88 | 93.5 | 7.4 | 8.6 | 3.5 | 3.00 | ||
90 | 95.5 | 7.6 | 8.6 | 3.5 | 3.00 | ||
92 | 97.5 | 7.8 | 8.7 | 3.5 | 3.00 | ||
95 | 100.5 | 8.1 | 8.8 | 3.5 | 3.00 | ||
97 | 103.5 | 8.3 | 9.0 | 3.5 | 3.00 | ||
98 | 103.5 | 8.3 | 9.0 | 3.5 | 3.00 | ||
100 | 105.5 | 8.4 | 9.2 | 3.5 | 3.00 | ||
| Material | Stainless Steel |
|---|---|
| Grade | 304/ A2-70 |
| Plating | None |
| Standard | DIN 472 |
Write Your Own Review